Blocked Drains Woolloomooloo

A clogged drain in Woolloomooloo typically starts with slow water flow in a sink, shower, or floor waste, followed by gurgling sounds or water backing up when other fixtures are used. The blockage forms when debris accumulates to the point where water can't pass, usually because of root intrusion in older pipes, grease solidifying in kitchen lines, or foreign objects lodged in bends. If ignored, the restriction worsens until water stops draining entirely or backs up into the property.

We assess blocked drains by inserting a high-definition CCTV camera into the line to see the obstruction's exact location, size, and type. That vision confirms whether it's a build-up that can be cleared with high-pressure water jetting or structural damage requiring drain relining or excavation. Hydro-jetting uses pressurised water (typically 3,000 to 5,000 PSI) to break apart grease, scour roots from pipe walls, and flush debris downstream, restoring flow without damaging the pipe interior.

Common blockage causes in inner Sydney properties include:

• Tree roots entering cracks in aging terracotta or clay sewer lines
• Fat, oil, and grease (FOG) solidifying as it cools in kitchen drains
• Hair and soap scum accumulating in bathroom floor wastes
• Foreign objects like sanitary products or wipes that don't break down

Once the line is cleared, we test flow and verify the blockage is fully removed before leaving. If the camera footage shows cracks, displaced joints, or collapsed sections, we explain the options and provide a separate fixed quote for structural repair. The initial clearing restores immediate function; replacement or relining addresses long-term integrity.

Dealing with a blocked sewer drain or blocked toilet in Woolloomooloo? Book an assessment so we can locate the restriction, confirm what's needed, and quote the work before starting.

Plumbing emergencies in Woolloomooloo require immediate response to prevent property damage, health risks, or loss of essential services. Fixed Today Plumbing operates a 24/7 emergency dispatch service, meaning urgent jobs are allocated to the nearest available duly licensed plumber and sent out immediately, with arrival timing confirmed when you call.

An emergency typically involves active water flow that can't be stopped, gas leaks with odour or hissing sounds, sewage backflow into the property, or total loss of hot water supply in cold weather. These situations justify urgent dispatch because delay increases damage costs or creates safety risks. Our plumbers carry fully stocked mobile workshops with diagnostic tools, replacement parts, and materials to resolve most emergencies onsite during the first visit.

Emergency work in inner Sydney properties often involves restricted access, parking limitations, and the need to coordinate with strata managers or tenants for entry. We confirm access arrangements when booking and provide clear arrival communication so someone can be present to grant entry and explain the fault.

Common emergency jobs include:

• Burst pipes flooding internal spaces or external areas
• Blocked toilets or drains causing sewage overflow
• Gas leaks requiring isolation and safety testing
• Hot water system failures with water leaking from relief valves
• Leaking taps or toilets where the isolation valve has failed

Emergency pricing uses the same fixed-price model as standard work. The plumber assesses the fault, explains what's needed to make it safe, and provides a fixed quote before starting permanent repairs. Temporary make-safe work (isolating water, stopping active leaks) is completed first so you can decide on permanent repairs once the scope is confirmed.

If you're unsure whether the situation justifies urgent dispatch, call and describe the fault. We'll confirm whether it needs urgent attention or can wait for a scheduled appointment.

A failing hot water system in Woolloomooloo typically announces itself through inconsistent temperatures, rust-coloured water in the morning, or no hot water at all. The fault usually traces back to a failed heating element in electric systems, a faulty gas burner or pilot light in gas systems, or a corroded sacrificial anode rod allowing the tank to rust from the inside.

We assess hot water faults by testing the system's operation, checking electrical connections and switchboard protection, inspecting for visible leaks or corrosion, and measuring water temperature at the outlet. That diagnostic confirms whether the system can be repaired (element replacement, thermostat adjustment, valve servicing) or needs full replacement due to tank failure or obsolete components.

Hot water installations in Woolloomooloo must comply with AS/NZS 3500 plumbing standards, including mandatory tempering valve installation (limiting outlet temperature to 50°C to prevent scalding) and pressure relief valve fitting (preventing tank over-pressurisation). We work with major brands including Rheem, Dux, Rinnai, Vulcan, Aquamax, and Thermann, installing storage systems (electric or gas), continuous flow units (gas or electric), and heat pump systems where space and power supply allow.

System types we install and service:

• Electric storage tanks (typically 125L to 400L capacity)
• Gas continuous flow (instantaneous hot water on demand)
• Gas storage systems (faster recovery than electric)
• Heat pump systems (energy-efficient but requiring outdoor space)

Installation timeframes vary based on the system type and whether existing connections can be reused. A like-for-like replacement (same fuel type and location) typically takes a few hours. Fuel conversions (electric to gas or vice versa) require additional work to run new gas lines or upgrade electrical circuits, extending the install time and affecting pricing.

If your water heater has stopped working or is leaking, book an assessment so we can diagnose the fault, explain repair versus replacement options, and provide fixed pricing for the work.