Plumber in Cronulla

Routine plumbing in Cronulla covers the repair, maintenance, and installation of pipes, fixtures, taps, toilets, and drainage connections in residential and commercial properties. This includes typical issues like leaking taps, running toilets, low water pressure, and minor pipe repairs; if inspection shows that the fault involves structural pipework or requires excavation, we explain the options and provide a fixed quote once scope is agreed.

We assess the affected area first, checking water flow, testing pressure where relevant, and identifying the source of leaks or blockages. Once the cause is clear, we provide an upfront fixed-price quote with no hidden fees, so you can decide whether to proceed. The price is by the job, not by the hour, and it doesn't change once agreed. After the installation or repair is complete, we test function (flow, pressure, or drainage) and clean up the work area before leaving.

In practice, the most common callouts in Cronulla involve dripping taps caused by worn washers or ceramic disc cartridges, toilets that keep running due to faulty cistern valves, and low pressure traced to partially blocked aerators or corroded galvanised steel pipe sections in older homes. Properties built during the 1960s and 1970s often have original copper hot water service lines and galvanised cold water mains, which can corrode internally over time and affect flow.

We also handle kitchen and bathroom fixture installations during renovations, including new tapware, sinks, vanities, and toilet suites. Fixture installation involves confirming existing pipe positions, isolating water supply, connecting new fittings to Australian Standards, and testing for leaks under pressure before handover. If the new fixture requires different pipe sizing or repositioning, we include that work in the quoted scope.

Our general plumbing services are available across the 2230 postcode. All attending technicians are fully licensed NSW plumbers, and we arrive in uniform with identification. For straightforward tap or toilet repairs, we typically carry the most common replacement parts onboard, which allows us to complete the job on the first visit when access and existing pipework allow it.

Hot water system work in Cronulla involves diagnosing faults in existing units, replacing failed systems, and installing new hot water service heaters for commercial and residential properties. This covers electric storage tanks, continuous flow gas systems, heat pump units, and solar hot water with electric or gas boosting; if your property has unusual space constraints, specific council requirements, or requires additional electrical or gas work to support the new system, we include that in the quoted scope once confirmed onsite.

A typical hot water failure presents as no hot water service at all, intermittent temperature, rust-coloured water in the morning, or visible leaks around the tank base or relief valve. In storage systems, these symptoms usually indicate a failed heating element (electric), a faulty thermocouple or pilot assembly (gas), or internal tank corrosion. Continuous flow gas units often fail due to scaled heat exchangers or faulty flow sensors. We assess the unit onsite, confirm the fault type, and explain whether repair is viable or whether replacement is the more cost-effective option.

When replacing a water heater, we confirm your household's usage patterns, the number of occupants, and whether you prefer electric, gas, or heat pump technology. Electric storage is often selected for lower upfront cost and simple installation. Continuous flow gas is preferred for energy efficiency, unlimited hot water, and compact wall-mounted installation. Heat pumps offer the lowest running costs but require adequate outdoor space and ambient airflow.

All installations are completed to AS/NZS 3500 standards and include mandatory safety devices: a Tempering Valve to limit tap temperature to 50°C (preventing scalding), and a Pressure Relief Valve to prevent tank over-pressurisation. Gas installations require a pressure loss test after connection to confirm the system is gas-tight, and we issue a compliance certificate where required. Electric systems must be installed by a licensed electrician or plumber with electrical endorsement, and we coordinate that work as part of the installation.

In Cronulla properties, space is often a constraint. Older homes with internal laundries or under-house storage can usually accommodate a replacement storage tank in the same location. Newer townhouses and apartments with limited outdoor space often benefit from switching to a compact continuous flow gas system, which can be wall-mounted externally and doesn't require a storage footprint.

We provide same-day hot water unit installation where the replacement unit is in stock, the existing connections are compatible, and no additional structural or compliance work is required. If the new system requires different pipe sizing, a new gas line, upgraded electrical supply, or council approval for external mounting, we include that in the quoted scope and adjust timing accordingly.

Our hot water supply services include installation, repair, and annual maintenance. If you're experiencing low water pressure, fluctuating temperature, or visible leaks around your hot water supply unit, contact us to arrange an assessment. We'll confirm the fault, explain your options, and provide a fixed-price quote before proceeding.

A ruptured pipe is an urgent plumbing emergency that requires immediate isolation of the water supply and professional repair to prevent property damage. Pipes fail due to corrosion, high water pressure, ground movement, freezing during winter cold snaps, or impact damage during renovations or landscaping work.

If a pipe bursts inside your home or under the property, the initial step is to isolate the water supply at the main shutoff valve (usually located at the front boundary near the water meter or inside the property near the hot water service). Once isolated, contact us immediately. We'll dispatch a licensed and insured plumber to assess the damage, locate the burst section, and complete the repair to restore your water supply.

Burst pipe symptoms include sudden loss of water pressure, visible water pooling or streaming from walls or ceilings, damp patches on floors or ceilings, or the sound of running water when no taps are open. In Cronulla's older homes, burst pipes often occur in original galvanised steel or copper sections that have corroded internally over decades of use.

We locate the burst section using a combination of visual inspection, pressure testing, and electronic leak detection equipment where the leak is hidden behind walls, under floors, or in sub-floor spaces. Once located, we assess whether the burst section can be repaired with a compression fitting or whether a full pipe replacement is required. Copper and PVC pipes can usually be repaired with a sectional replacement. Galvanised steel pipes often require replacement of longer sections due to widespread internal corrosion.

After the repair is complete, we test the system under pressure to confirm the repair is watertight and that water pressure has been restored across all fixtures. We also check for secondary leaks that may have been masked by the primary burst. If the burst caused water damage to walls, floors, or ceilings, we can provide documentation of the repair for insurance claims where needed.

For hidden leaks that haven't yet caused a visible burst, such as slow leaks inside walls, under slabs, or in underground service lines, we use electronic ultrasonic leak detection to pinpoint the leak location without invasive demolition. This equipment listens for the high-frequency sound of water escaping under pressure, allowing us to mark the exact leak position before opening walls or excavating.

Our emergency plumbing service operates 24/7 for broken pipe callouts across Cronulla. If you've isolated the water supply and need urgent repair, contact us immediately. We'll dispatch the nearest available licensed and insured plumber and provide an ETA based on current traffic and job allocation.

When you contact Fixed Today, our customer service team confirms the nature of the plumbing issue, the property location in Cronulla, and whether it's an emergency or a scheduled booking. For urgent situations like burst pipes, gas leaks, or drains backing up, we dispatch the nearest available duly licensed NSW plumber immediately and provide an ETA based on current traffic and job allocation. For non-urgent work, we schedule an appointment window that suits your availability.

Our plumbers arrive in uniform and confirm identity at the door. If you've requested specific entry instructions, such as using a side entrance, removing shoes, or minimising movement through certain areas, we follow those preferences. We assess the affected area first, confirm what's involved, and explain the fault or scope in plain English before starting any work.

Once scope is agreed, we provide a fixed-price quote with no hidden fees. The price is by the job, not by the hour, and it doesn't change once agreed. You can decide whether to proceed once you know the cost and what's included. If the job requires parts we don't carry onboard, or if inspection reveals additional work (such as structural pipe damage or compliance upgrades), we explain the options and provide a revised quote before proceeding.

During the job, we use drop sheets or protective covers to protect floors and surfaces in the work area. We isolate the work area where practical to reduce mess and keep disruption to a minimum. If the job involves cutting into walls, excavation, or work in occupied spaces, we explain what's involved and confirm access permissions before starting.

After the work is complete, we test outcomes, flow rates after clearing blockages, pressure after pipe repairs, temperature and function after hot water installation, or gas-tightness after gas work. We clean up the work area, remove debris generated by the job, and confirm you're satisfied with the result before leaving.

We provide receipts and invoices suitable for landlords, agents, strata records, and business accounting. If required documentation is required (such as gas compliance certificates or backflow prevention test reports), we issue that as part of the job completion. Our work is backed by a Lifetime Labour Warranty on workmanship, and manufacturer warranties apply separately to hardware and appliances.

If you're unsure about your plumbing issue or need advice on whether it requires urgent attention, contact us anytime. Our phone line is available 24/7, and we'll confirm whether a NSW-NSW-licensed plumber should assess it today or whether it can be scheduled at your convenience.