Blocked Drains Greenacre

Fixed Today Plumbing repairs burst and leaking pipes in Greenacre by isolating the affected section, assessing the damage, and either replacing the damaged length or relining it if the surrounding pipe is still sound. This covers accessible copper, PVC, and galvanised steel pipes; if the burst is behind a finished wall or under a concrete slab, we explain the access options and confirm scope before any structural work proceeds.

Pipe bursts in residential properties typically result from corrosion in older metal pipes, pressure surges from water hammer, or ground movement that stresses rigid joints. In Greenacre's older homes, galvanised steel and copper pipes can corrode from the inside over decades, thinning the wall until a weak point fails. Newer PVC pipes are less prone to corrosion but can crack if struck during excavation or if the ground shifts during wet/dry cycles in reactive clay soils.

When a pipe bursts, the priority is stopping water flow to prevent further damage. If you can locate the property's water isolation valve (usually near the front boundary or water meter), turning it off reduces flooding while the plumber is on the way. If the valve is inaccessible or you're unsure where it is, we'll isolate the water onsite as the first step.

After isolation, we inspect the burst section to confirm the cause and extent of the damage. A single pinhole leak in a copper pipe may only require a section replacement, while widespread corrosion suggests the entire run is near the end of its service life. We explain what the inspection reveals and provide a fixed-price quote for the repair before starting work.

For leaks behind walls or under slabs, trenchless pipe relining can repair the damage without removing tiles, cabinetry, or flooring. The process involves inserting a resin-saturated liner into the existing pipe, then inflating and curing it to form a seamless internal pipe. This method works for most pipe materials and avoids the cost and disruption of traditional excavation.

Once the repair is complete, we test the system by restoring water pressure and checking for leaks at the repair site and surrounding joints. We also check water pressure at taps to confirm the system is delivering normal flow. All pipe repair work is backed by our Lifetime Labour Warranty on workmanship, so if a joint or repair fails due to our work, we'll return and fix it.

Our licensed gas fitters in Greenacre handle gas fitting work including new gas point installations, appliance connections, gas leakage identification, and repairs to existing gas lines. All gas work in NSW must be performed by a fully licensed gasfitter (NSW) and requires a compliance certificate upon completion to verify the installation meets safety standards (AS/NZS 5601.1).

Gas leaks are identified by the distinctive "rotten egg" odour added to natural gas as a safety signal, or by hissing sounds near appliances and pipework. If you smell gas or suspect a leak, the immediate step is to avoid igniting any flames or electrical switches, ventilate the area by opening windows and doors, and call a properly licensed gas fitter. Do not attempt to locate the leak yourself, as even a small spark can ignite gas in an enclosed space.

When a gas leak is reported, we dispatch a licensed gas fitter with combustible gas detection equipment to locate the source. The detector identifies gas concentration levels and pinpoints the leak, even if it's behind walls or under floors. Once located, we isolate the gas supply, repair or replace the faulty section, and conduct a pressure loss test to confirm the system is gas-tight before recommissioning.

For new gas point installations (such as adding a gas cooktop or connecting a new hot water service service), we assess the existing gas line capacity to confirm it can supply the additional appliance. If the main line needs upgrading, we explain what's involved and provide a fixed-price quote before starting work. All new installations are tested and certified, and a compliance certificate is issued to confirm the work meets NSW safety standards.

Gas appliance connections must be performed by a fully licensed and insured gas fitter to ensure correct sizing, secure joints, and proper ventilation. We connect cooktops, ovens, hot water systems, and gas heaters, then test for leaks and verify correct appliance operation before leaving. If an appliance isn't igniting or is producing unusual soot buildup, we inspect the burner and gas supply to identify the fault.

All gas fitting work is backed by our Lifetime Labour Warranty on workmanship. If a joint or connection we install develops a leak due to our work, we'll return and fix it. Gas work is serious, and we take the time to do it correctly, test it thoroughly, and document it properly so you have extra reassurance.

For plumbing work in Greenacre, Fixed Today Plumbing delivers licensed, insured service across the Canterbury-Bankstown region. We've worked in the area for over 15 years, handling everything from routine drain repairs to urgent burst pipe callouts. Our team knows the local housing stock, the common pipe materials in older streets, and the access realities when working in established suburbs with mature trees and narrow driveways.

We dispatch from West Sydney hubs, which means response times are typically reliable for properties across Greenacre. When you call, we confirm your location, ask a few questions about the issue, and provide an arrival window based on current job timing and traffic conditions. For urgent situations, jobs are sent out first and we update you if timing changes.

Our pricing model is straightforward: we assess the scope onsite, explain what's involved, and provide a fixed-price quote before starting work. The price is by the job, not by the hour, and the quote is valid for one month from the date issued. There are no hidden fees added later, and you decide whether to proceed once you know the full cost and what's included.

We work in occupied homes, rental properties, and strata buildings. Our technicians wear boot covers or clean shoe covers when requested, use drop sheets to protect floors, and clean up the work area before leaving. If access coordination is needed (such as arranging entry with a property manager or working around strata booking windows), we handle that as part of the scheduling process.

For stormwater drain blockages caused by leaves, silt, or debris buildup, we clear the line and check the grate and downpipe connections to confirm water can flow freely. Stormwater systems are separate from sewer lines, and blockages in these systems typically cause pooling around the property rather than sewage backups. We explain what's causing the blockage and what maintenance helps prevent recurrence.

If you're unsure whether your plumbing issue needs urgent attention or can wait, a quick call is enough to confirm. Our team explains what the symptoms suggest, what's likely involved, and whether immediate dispatch is necessary or if a scheduled appointment works better. You don't need to diagnose the fault yourself; we'll confirm the cause onsite and explain the next step.

All work is backed by our Lifetime Labour Warranty on workmanship. If a installation or repair fails due to our work, we'll return and fix it. We also provide receipts and invoices suitable for landlords, agents, and business records, and we can document work completed where relevant for maintenance logs or compliance records.

To book a plumber in Greenacre, call 1800 349 338 or enquire online. Our team is available 24/7 for emergency callouts, and we schedule standard appointments at times that work for you. We take the time to explain what's involved, answer your questions, and make sure you're comfortable with the scope and cost before we start.