Plumber Stanmore

Blocked drains in Stanmore properties often result from tree root intrusion in older clay or terracotta sewer lines, or grease and debris buildup in kitchen waste pipes. A blockage stops wastewater from draining, which can cause backups into sinks, showers, or toilets, and if left unresolved may lead to overflow and water damage inside the property. The first step is locating the obstruction using a high-definition CCTV drain camera, which shows us the blockage type, depth, and pipe condition without guesswork or unnecessary excavation.

Once the blockage is identified, we clear it using high-pressure water jetting (hydro-jetting), which fires water at controlled pressure to break up roots, scour grease from pipe walls, and flush debris through the system. For severe root masses or foreign objects, mechanical cutting tools are used where appropriate. After clearing, we re-inspect with the camera to confirm full flow is restored and check for any structural damage that might need repair.

If the CCTV check reveals cracked pipes, collapsed sections, or significant root penetration points, we explain the condition and provide options: sectional repairs, pipe relining (a trenchless method that creates a new pipe inside the old one without digging up gardens or driveways), or full replacement if the line has failed. Scope is confirmed and quoted before any additional work proceeds, so you can decide with full information.

Blocked drains are treated as urgent when there's active overflow or no drainage at all. We dispatch immediately for these situations and aim to restore flow on the first visit. For slower drains or recurring blockages, we schedule a camera inspection to find the underlying cause rather than just clearing the symptom. Call us on 1800 349 338 to book service the same day, and we'll confirm timing when you make the booking.

Hot water system failures in Stanmore typically present as no hot water, inconsistent temperature, rust-coloured water indicating tank corrosion, or visible leaks around the relief valve or base. Older electric storage tanks often fail due to sediment buildup or a deteriorated sacrificial anode rod, while gas continuous flow units may develop ignition issues or scaled heat exchangers. We assess what's failed, whether replacement or repair is the practical option, and explain the trade-offs in plain English.

For repairs, we service major brands including Rheem, Rinnai, and Dux, addressing issues like faulty thermostats, blown heating elements, pilot light problems, or pressure relief valve leaks. When replacement is needed, we discuss system types suited to your household size and usage: electric storage tanks (lower upfront cost, longer reheat time), gas continuous flow units (instant hot water, energy-efficient but higher installation cost), and heat pump systems (efficient but climate-dependent performance).

All hot water installations must comply with AS/NZS 3500 plumbing standards, which require tempering valves to limit tap temperature to 50°C (preventing scalding) and pressure relief valves to prevent tank over-pressurisation. We install to these standards, provide any required compliance documentation, and test the system before leaving to confirm temperature, flow, and safety device operation.

If you're replacing a failed unit, we can usually complete the installation on the same day provided the new system is in stock and there are no unexpected site complications (such as needing to upgrade gas supply lines or relocate mounting positions). For complex installations involving position changes, additional pipework, or gas meter upgrades, we scope the full job and provide a fixed quote before proceeding.

Hot water emergencies?complete system failure in winter, active leaks causing water damage?are prioritised for same-day dispatch. For non-urgent replacements or efficiency upgrades, we can schedule at a time that suits your availability. Request a quote by calling 1800 349 338, and we'll arrange an onsite assessment to confirm requirements and pricing.

Roof and gutter leaks in Stanmore properties often occur where gutters are blocked by leaf litter, causing water to back up and overflow into fascias or roof cavities. In older homes, deteriorated gutter brackets, rusted downpipes, or failed valley flashing can allow water to penetrate the structure. If left unresolved, this leads to ceiling stains, timber rot, and potential electrical hazards where wiring runs through affected areas.

We inspect the roof drainage system to locate the entry point, checking gutters for blockages and structural integrity, downpipes for obstructions or disconnections, and flashing around penetrations like vents and chimneys. Once the source is identified, we clear blockages, repair or replace damaged sections, and test water flow during the visit to confirm the system drains correctly under load.

For properties with multiple downpipes or complex roof layouts, we trace the full stormwater path to ensure all outlets are clear and properly connected to the stormwater system. In Stanmore's older housing stock, original stormwater drains sometimes connect to combined sewer systems, which require careful management to avoid overloading during heavy rain. We work within Sydney Water's requirements where stormwater and sewer connections are involved.

Roof and gutter work is treated as urgent when active leaks are causing internal water damage. For preventive maintenance or post-storm inspections, we can schedule during daylight hours when roof access is safe. Our technicians use appropriate fall protection and confirm access is safe before starting work on steep or high-level roofs.

Toilet repairs typically address continuous running (water flowing into the bowl after flushing), weak or incomplete flushing, blockages causing slow drainage or overflow, and leaks around the base or cistern connections. A running toilet wastes significant water and drives up bills, while a blocked toilet is an immediate hygiene concern that needs rapid resolution.

For running toilets, the usual cause is a worn flapper valve or fill valve inside the cistern that no longer seals properly. We inspect the cistern components, replace failed parts, and adjust the water level to restore proper shut-off. For weak flushing, we check the flush valve, rim jets, and siphon jet for blockages or mechanical failure, then repair or replace as needed.

Blocked toilets are often caused by excessive paper, foreign objects, or tree roots in the sewer line beyond the toilet's trap. We assess whether the blockage is at the fixture (clearable with a closet auger or plunger) or further in the sewer (requiring camera inspection and jetting). If the blockage is in the main line, we follow the same process as other drain unblocking: camera inspection to locate, high-pressure jetting to clear, then re-inspection to verify flow and check pipe condition.

Leaks around the toilet base usually indicate a failed wax ring or pan seal, which allows sewer gases and wastewater to escape. We remove the toilet, replace the seal, and reinstall with proper alignment and secure mounting. If the floor beneath is damaged by long-term leakage, we'll note that and recommend repair before reinstalling the toilet to avoid future movement or instability.

Toilet repairs are treated as urgent when there's active overflow, no flushing capability, or sewer gas smell in the bathroom. We dispatch same-day for these situations. For minor issues like slow refills or occasional running, we can schedule a standard service call at a time that suits you.

Commercial plumbing in Stanmore includes scheduled maintenance for strata buildings, retail premises, cafés, offices, and industrial sites, as well as emergency callouts for burst pipes, blocked sewer lines, gas leakages, and hot water unit failures that disrupt business operations. Commercial work often operates under tighter timeframes and higher hygiene or safety requirements than residential jobs, and we adjust our approach accordingly: minimising downtime, coordinating around trading hours, and providing documentation suitable for strata committees, property managers, and compliance audits.

Common commercial services include:

• Blocked drain and sewer line clearing using CCTV and high-pressure jetting
• Gas leak detection and appliance installation or servicing for commercial kitchens
• Hot water system servicing and replacement for multi-unit buildings
• Water filter installation for cafés and offices
• Bathroom and kitchen fit-outs for new tenancies or refurbishments
• Backflow prevention device testing and certification
• Routine maintenance programs to reduce emergency callout frequency

For strata properties, we work with building managers to schedule maintenance during available time windows, provide detailed job reports for strata minutes, and differentiate between lot owner responsibility and common property work so invoicing and approvals are clear. We're familiar with access procedures, site induction requirements, and insurance documentation expected in commercial environments.

Emergency commercial plumbing is prioritised when the issue affects business operation, public safety, or causes property damage. We dispatch immediately for active leaks, sewer overflows, gas leaks, or critical system failures. For planned maintenance, installations, or refurbishments, we quote the full scope, confirm timing and access, then complete the work to agreed schedules.

All commercial plumbing is completed to meet Australian Standards, tested and verified before handover, and backed by our Lifetime Labour Warranty on workmanship. For new installations or major refurbishments, we provide compliance certificates and as-built documentation where required. If you're searching for a professional plumber for commercial premises in Stanmore, call 1800 349 338 to discuss your requirements, and we'll arrange an onsite assessment to confirm scope and pricing.