Open Now
4.8-Star Service
Find a Plumber
Near You
Fixed Today

Plumber Erskine Park

Are you looking for a plumber in Erskine Park, 2759 NSW? Or an emergency 24/7 after hours plumber near you? See the difference Fixed Today Plumbing Sydney makes.

0 Reviews

Looking for a Specific Type of Plumber in Erskine Park?

Fixed Today Plumbing provides licensed plumbing services to Erskine Park from our West Sydney dispatch hub, covering urgent repairs and scheduled installations across the 2759 postcode. Immediate dispatch is arranged for emergencies, with the nearest available technician allocated based on current bookings and traffic along the M4 corridor. This covers plumbing, drainage, gas fitting, and hot water work in occupied homes, rentals, and commercial sites; if inspection shows structural damage or compliance requirements, options are explained and scope is verified before any additional work proceeds.

Erskine Park properties vary in age and construction type, from brick veneer homes built during the 1980s expansion to newer master-planned estates. Older sections near the established core typically have original terracotta or early PVC drainage lines, while newer developments use modern plastic systems. Over time, clay pipes are prone to root intrusion from established landscaping, while ageing copper supply lines can develop pinhole leaks or burst under pressure fluctuations.

We provide upfront fixed pricing before we begin, so you decide once scope is verified. All attending plumbers are licensed in NSW (Licence 305428C), and we're fully insured with Public Liability and Workers Compensation. That means if accidental property damage occurs during work, or if a workplace injury happens on the job, you're protected. Our Lifetime Labour Warranty backs the workmanship we complete, and manufacturer warranties apply to all installed hardware.

Operating across Western Sydney for over 15 years, we've handled drainage blockages, hot water failures, gas leak testing, broken pipe repairs, and general plumbing in thousands of local properties. Whether you're dealing with a blocked kitchen sink, a leaking bathroom, or no hot water in the morning, our team arrives with the diagnostic tools and parts needed to assess the fault and restore function the same day where practical.

Professional Plumbing Services in Erskine Park

We handle commercial and residential plumbing across Erskine Park, from routine tap repairs and toilet faults to comprehensive system overhauls and compliance upgrades. This includes diagnosing leaks with electronic detection equipment, clearing obstructions with high-pressure water jetting, installing and replacing hot water systems, and performing licensed gas fitting work for appliances and new connections; if diagnostics reveal structural pipe damage or code compliance issues, we explain the options and provide a fixed quote once scope is confirmed.

Our technicians arrive in uniform, confirm identity on arrival, and explain what will be done before starting. We use drop sheets to protect floors, wear boot covers where requested, and clean up the work area at the end. All work is completed to Australian Standards, and we test and verify outcomes before leaving, such as confirming flow rates after clearing a blockage or checking for leaks after a repair.

Fixed Today Plumbing operates from localised dispatch points across Sydney, including our West Sydney hub. Erskine Park is easily reached via the M4, so response times from the hub are reliable for both urgent and scheduled jobs. Urgent jobs are sent out first, with the nearest available plumber allocated based on current workload and traffic conditions. We provide ETA updates where possible so you know when to expect the technician.

We provide fixed, upfront pricing based on confirmed scope, so the price quoted is the price paid. There are no hidden fees. Call-out fee status varies by service area; confirm the call-out fee when booking if it applies to your job. For paying jobs, mention "web55" to receive $55 off (limited to one per person). Payment is accepted by all major credit cards, and we provide receipts suitable for landlords, agents, and business records.

Our team has resolved thousands of plumbing issues across Western Sydney since 2010, giving us direct experience with the clay pipe failures common in properties built during the 1980s expansion, the copper pinhole leaks seen in older homes, and the hot water system failures that occur in ageing storage tanks. We're also experienced in strata and commercial environments, where clear communication, documentation, and scheduling around entry windows are essential.

We extend our services across the Western Sydney suburbs, including Merrylands West, Guildford West, Prospect, and Horningsea Park. Our work in the region includes hot water servicing in Casula, general plumbing in Holsworthy, licensed gas fitting in Moorebank, emergency plumbing in Pemulwuy, and clogged drain clearance in Rossmore.

Fixed Pricing Before Work Starts

We provide a fixed-price quote based on confirmed scope before starting work. The price quoted is the price paid, with no surprise additions at the end.

Family-Owned with 800+ Reviews

We're a family-owned business with a near-perfect 5-star rating based on over 800 verified customer reviews, reflecting our commitment to quality and honest service.

24/7 Emergency Dispatch Available

We provide 24/7 emergency support for urgent plumbing issues. Urgent jobs are sent out first, with the nearest available technician dispatched from local hubs.

Licensed, Insured, and Warranted

All technicians are licensed plumbers (NSW). We're fully insured with Public Liability and Workers Compensation, and all workmanship is backed by our Lifetime Labour Warranty.

Leaking Bathrooms: A Cause for Concern

Bathroom leaks typically originate from failed waterproofing membranes, worn grout or silicone seals, or faulty fixture connections beneath sinks and toilets. In older Erskine Park homes, original waterproofing may have degraded over decades, allowing moisture to penetrate the substrate and travel into adjoining rooms or the subfloor. Left unaddressed, this leads to structural timber rot, mould growth, and damage to finishes in adjacent spaces.

We locate the source of the leak using moisture meters and visual inspection, then confirm the extent of damage before quoting. Common fixes include resealing shower bases, replacing worn tap washers and cartridges, and re-waterproofing wet areas where membranes have failed. If inspection reveals structural damage to framing or flooring, we explain the options and coordinate with builders where required.

Leaks also waste water, increasing your bill and environmental impact. A slow leak from a toilet cistern can waste hundreds of litres per day, while a dripping tap adds up over time. We test all repaired areas to confirm they're watertight before leaving, and we provide documentation for landlords, agents, and strata where required.

Clearing Blocked Drains with Precision

Drainage blockages in Erskine Park properties often result from tree root intrusion in older clay or terracotta lines, or from Fat, Oil, and Grease (FOG) buildup in kitchen drains. Root systems seek moisture and enter pipes through microscopic cracks, expanding over time and trapping debris. In kitchen lines, FOG solidifies as it cools, narrowing the pipe diameter and catching solid waste.

We start with a high-definition CCTV drain camera inspection to identify the blockage type, depth, and precise location within the property boundary. This allows us to see inside the pipe without excavation, confirming whether the obstruction is roots, grease, collapsed sections, or foreign objects. Once located, we clear the blockage using high-pressure water jetting, which fires water at pressures sufficient to pulverise roots and scour grease from pipe walls.

If the camera reveals structural damage such as collapsed sections, offset joints, or severe root intrusion, we explain the repair options and provide a fixed quote. Trenchless drain relining is often recommended for repairs beneath driveways, bathrooms, or established landscaping, as it avoids excavation and creates a structurally independent pipe-within-a-pipe. Where relining isn't suitable, we coordinate excavation and replacement.

After clearing, we test flow rates and provide footage of the cleared line where helpful. We also explain what caused the blockage and what can be done to reduce recurrence, such as regular jetting maintenance or root barrier installation.

Returning Customer

Customers Love To Return Back

We take pride in high quality services and returning customers are testimony of that.

4.8Star Rating
809Customer Reviews

Gas Fittings: Safety and Expertise Hand-in-Hand

Gas work in NSW must be performed by a properly licensed gas fitter and comply with AS/NZS 5601.1 safety standards. We're licensed for gas fitting (Licence 305428C) and handle gas appliance installations, leak detection and repair, and new gas connections for cooktops, ovens, heaters, and hot water systems.

Gas leaks are identified by the distinctive "rotten egg" odour (an added mercaptan signal), hissing sounds near appliances, or dying vegetation over underground lines. We use combustible gas detectors and thermal imaging to locate leaks behind walls or in subfloors, then isolate the affected section and repair or replace the damaged line. All repaired or altered gas installations undergo a pressure loss test to confirm the system is gas-tight before being recommissioned.

When installing new gas appliances, we confirm the existing gas supply is adequate for the additional load, install the connection using approved materials and fittings, and test for leaks before commissioning. A compliance certificate is issued upon completion to verify the installation meets safety standards, as required in most NSW jurisdictions.

If you smell gas, turn off the gas supply at the meter if safe to do so, open windows to ventilate, and call us immediately. Do not operate electrical switches or create sparks. We provide 24/7 emergency response for gas leaks and arrange immediate dispatch so the system can be checked and made safe.

Efficient Hot Water Solutions

Hot water system failures in Erskine Park typically present as rust-coloured water in the morning (indicating sediment buildup or a failing anode rod), fluctuating temperatures (thermostat or element faults), or visible leaks from the tank or pressure relief valve. In older storage systems, sediment accumulation insulates heating elements or gas burners, reducing efficiency and increasing energy costs. Over time, internal corrosion can lead to tank failure and flooding.

We install, repair, and replace hot water systems from major brands including Rheem, Rinnai, and Dux. System types include Electric storage, Gas continuous flow, Gas storage, and Heat Pump units. Electric storage is often chosen for lower upfront costs, while continuous flow gas is preferred for energy efficiency and space-saving design.

Under the National Construction Code and AS/NZS 3500 standards, hot water installations must include Tempering Valves to limit water temperature to 50°C at the tap (preventing scalding) and Pressure Relief Valves to prevent tank over-pressurisation. We ensure all installations meet these requirements and provide compliance paperwork where required.

If your existing system is failing, we assess the fault onsite, explain whether repair or replacement is the practical option, and provide a fixed quote. We guide you towards the ideal system for your household size, usage patterns, and budget, and we handle the full installation including removal of the old unit, connection of water and gas or electrical supply, and commissioning. All work is tested and verified before leaving, and manufacturer warranties apply to all installed hardware.

Burst Pipes: Mitigating Damage with Urgency

A ruptured pipe is urgent. Water escapes under pressure, flooding rooms, damaging finishes, and soaking structural timber and insulation. In Erskine Park properties, burst pipes often result from corrosion in ageing copper or galvanised steel lines, excessive water pressure, ground movement stressing pipe joints, or freezing (rare but possible in cold snaps).

If a pipe bursts, turn off the water supply at the meter if safe to do so, then call us immediately. We provide 24/7 emergency response and arrange immediate dispatch so the leak can be isolated and damage limited. Our technicians arrive with the tools and parts needed to make on-the-spot repairs or replace damaged sections, minimising downtime.

We use electronic ultrasonic leak location to locate hidden bursts behind walls or under slabs without invasive demolition. Once located, we isolate the affected section, replace or repair the damaged pipe, and test the system under pressure to confirm it's watertight. Where burst pipes have caused ceiling or wall damage, we coordinate with builders and provide documentation for insurance claims.

In practice, we commonly see burst pipes in older copper supply lines where pinhole leaks have developed due to corrosion, and in exposed external pipes where ground movement or tree root pressure has stressed joints. We explain what caused the burst and what can be done to reduce recurrence, such as replacing ageing sections or installing pressure reduction valves where mains pressure is excessive.

What to Expect When You Book

When you contact us, we'll ask about the issue, the property type, and any access constraints such as strata rules or restricted parking. We'll confirm whether the job is urgent or can be scheduled, and we'll provide an ETA when booking. For urgent jobs, the nearest available plumber is dispatched first, and we provide ETA updates where possible.

On arrival, the technician confirms identity, explains what will be assessed, and inspects the affected area using diagnostic equipment such as CCTV cameras, leak detectors, or pressure gauges. We explain the findings in plain English, confirm the scope, and provide a fixed-price quote before starting work. You decide whether to proceed once scope and pricing are confirmed.

During work, we use drop sheets or protective covers to protect floors and surfaces, and we isolate the work area where practical. We keep noise and disruption as low as practical during occupied home work, and we explain what we're doing if you have questions. Once work is complete, we test and verify outcomes (such as confirming flow rates, checking for leaks, or commissioning a new system), clean up the work area, and remove debris generated by the work.

We provide receipts and invoices suitable for landlords, agents, and business records. Where required, we provide compliance documentation for regulated work such as gas fitting or backflow prevention. If the job reveals additional issues, we explain the options and provide a separate quote; we don't proceed with additional work without your approval.

Our Lifetime Labour Warranty backs the workmanship we complete. If you're not satisfied with the work, we'll return to make it right. We follow up on completed projects to ensure the work has been executed to your satisfaction.

When to Call a Plumber Immediately

Some plumbing situations require immediate professional attention to prevent property damage, safety hazards, or health risks. Call us immediately if you're experiencing any of the following in Erskine Park:

  • Active water leaks from pipes, ceilings, or walls (turn off the water supply at the meter if safe to do so)
  • Gas odours (turn off the gas supply at the meter if safe to do so, ventilate, and do not operate electrical switches)
  • Sewage backups or overflowing drains (avoid contact and keep children and pets away)
  • No hot water in occupied homes or commercial sites where hot water is essential
  • Flooding on the property from ruptured pipes or stormwater system failures

We provide 24/7 emergency support, with immediate dispatch arranged for urgent jobs. The nearest available technician is allocated from local hubs, and we provide ETA updates where possible. Our fully stocked mobile workshops carry the parts and tools needed to handle most emergency repairs onsite, minimising downtime and restoring function the same day where practical.

For non-urgent issues such as dripping taps, slow drains, or minor leaks that are contained, we can schedule a convenient appointment during business hours. We offer flexible scheduling to accommodate your availability.

Commercial Plumbing: Keeping Your Business Running Smoothly

Commercial and industrial plumbing failures disrupt operations, create safety hazards for staff and customers, and can result in lost revenue and regulatory non-compliance. We handle commercial plumbing across Erskine Park, from routine maintenance and compliance inspections to emergency repairs and system upgrades.

Our commercial services include burst pipe repairs, general maintenance, gas line repairs and installations, collapsed water mains, and commercial hot water system repairs and replacement services. We understand that downtime is costly, so we prioritise rapid response, clear communication, and safe work practices to minimise disruption.

We can work in strata and commercial environments with clear documentation and coordination. Where required, we follow site induction procedures and sign-in requirements. We provide job documentation suitable for maintenance logs and compliance records, and we coordinate with property managers, strata, or tenants for access.

For hospitality, healthcare, office, and retail businesses, efficient plumbing, gas, and drainage systems are essential. We're available 24/7 to respond to emergencies, and we can schedule maintenance and inspections around your operating hours to reduce impact on your business.

Recent Jobs Completed

Date & TimeServiceLocation
Loading recent jobs...

Plumbing FAQ's in Erskine Park

Below are answers to the questions Erskine Park residents ask most frequently. If your question isn't answered here, call us and we'll provide the information you need.

Do you cover Erskine Park for emergency plumbing?

Yes. We provide 24/7 emergency plumbing support to Erskine Park from our West Sydney dispatch hub. Urgent jobs are sent out first, with the nearest available plumber dispatched based on current bookings and traffic conditions along the M4 corridor. We provide ETA updates where possible so you know when to expect the technician.

What are your call-out fees to Erskine Park?

Call-out fee status varies by service area and job type. Confirm the call-out fee when booking if it applies to your job. We provide fixed, clear pricing based on confirmed scope before starting work, so the price quoted is the price paid with no hidden fees.

How quickly can you respond to emergencies here?

Response timing depends on current bookings and traffic conditions. Erskine Park is easily reached via the M4 from our West Sydney hub, so response times are reliable for urgent jobs. Immediate dispatch is arranged for emergencies, with the nearest available technician allocated first. We provide an ETA when booking and update you if conditions change.

Are your plumbers licensed for gas fitting work?

Yes. All attending technicians are licensed plumbers (NSW) (Licence 305428C), and we're licensed for gas fitting work. Gas installations and repairs comply with AS/NZS 5601.1 safety standards, and compliance certificates are issued upon completion where required. We handle gas appliance installations, leak detection and repair, and new gas connections.

What causes blocked drains in Erskine Park properties?

Blockages in older Erskine Park properties often result from tree root intrusion in clay or terracotta drainage lines, where roots enter through microscopic cracks and expand over time. In kitchen drains, Fat, Oil, and Grease (FOG) buildup solidifies and traps solid waste. We use CCTV drain cameras to identify the blockage type and location, then clear it with high-pressure water jetting.

Do you provide upfront pricing before starting work?

Yes. We provide a fixed-price quote based on confirmed scope before starting work. The price quoted is the price paid, with no hidden fees. If inspection reveals additional issues, we explain the options and provide a separate quote; we don't proceed with additional work without your approval.

What should I do if a pipe bursts?

Turn off the water supply at the meter if safe to do so, then call us immediately. We provide 24/7 emergency response and arrange immediate dispatch so the leak can be isolated and damage limited. Our technicians arrive with the tools and parts needed to make on-the-spot repairs or replace damaged sections.

How long does a hot water system installation take?

Installation timing depends on the system type and site conditions. A straightforward like-for-like replacement typically takes a few hours, while a new installation requiring gas line extensions or electrical upgrades can take longer. We confirm timing once scope is assessed onsite, and we test and commission the system before leaving.

What warranty do you provide on your work?

All workmanship is backed by our Lifetime Labour Warranty. Manufacturer warranties apply to all installed hardware and appliances. If you're not satisfied with the work, we'll return to make it right. We follow up on completed projects to ensure the work has been executed to your satisfaction.

Can you work in strata and commercial properties?

Yes. We handle plumbing in strata and commercial environments with clear communication and documentation. Where required, we follow site induction procedures and sign-in requirements. We provide job documentation suitable for maintenance logs and compliance records, and we coordinate with property managers, strata, or tenants for access.

Happy Customers

Similar Other Services

Contact Us Need a Plumbing Service?

1800 349 338