Blocked Drains Cromer

Blocked drains in Cromer homes typically result from grease solidifying in kitchen lines, hair and soap scum accumulating in bathroom drains, or tree roots entering microscopic cracks in aging clay pipes. In older suburbs with established landscaping, fine roots seek moisture and expand inside the pipe over time, trapping debris and restricting flow. Left unaddressed, a partial blockage can escalate to a complete stoppage, causing wastewater to back up into sinks, showers, or toilets.

We begin with a CCTV drain camera inspection to visually identify the blockage type, depth, and precise location within your property boundary. This allows us to confirm the cause without invasive digging and select the right clearing method. For grease and debris buildup, we use high-pressure water jetting (hydro-jetting) at pressures sufficient to scour pipe walls and restore near-full capacity. For root intrusion or foreign objects, we may use mechanical cutting tools or recommend trenchless pipe relining if the pipe structure is compromised.

Common blockage causes we see in real terms:

• Fat, Oil, and Grease (FOG) solidifying as it cools in kitchen waste lines
• Hair, soap residue, and hygiene products accumulating in bathroom drains
• Tree roots from Ficus or large Eucalypts common in Northern Beaches gardens
• Foreign objects such as wipes, sanitary products, or children's toys flushed down toilets
• Structural deterioration in terracotta or clay pipes installed during the 1960s and 1970s expansion

Once the blockage is cleared, we test flow rates and provide photos or footage of the pipe condition where helpful. If inspection reveals structural damage, we explain the repair options (replacement or relining) and provide a fixed quote for the additional work. You decide once the scope is confirmed. All drainage work is completed to Australian Standards, and we provide cleanup and documentation suitable for landlords, agents, or strata where required.

For urgent blockages causing overflow or wastewater backup, we offer 24/7 emergency dispatch. Call 1800 349 338 to arrange an assessment or arrange same-day service where scheduling allows.

When a toilet overflows, a drain backs up into your living area, or a hot water supply system fails during winter, the situation is urgent. Fixed Today Plumbing provides 24/7 emergency plumbing services for Cromer residents, with immediate dispatch for jobs that pose a safety risk or are causing active property damage. Our licensed emergency plumbers carry fully stocked mobile workshops, allowing us to resolve most issues on the first visit without waiting for parts.

Emergency dispatch means urgent jobs are sent out first and the nearest available technician is allocated from our localised Sydney hubs. We provide ETA updates where possible, and arrival timing depends on current bookings and traffic conditions. All attending technicians are licensed plumbers in NSW, arrive in uniform, and can identify themselves before entry.

Common emergency scenarios we respond to:

1. Overflowing toilets or drains — We isolate the affected fixture, clear the blockage, and test flow to confirm the line is restored.
2. Burst pipes or active leaks — We locate the leak, isolate the water supply, and repair or replace the affected section to stop damage.
3. Hot water system failures — We assess the fault, explain the repair or replacement options, and provide a fixed quote before proceeding.
4. Gas leaks or gas odours — We isolate the gas supply, locate the leak using specialised detection equipment, and repair or replace the faulty section to make the system safe.

We explain what we're doing before starting and confirm access permissions at the door. Work areas are protected with drop sheets or covers, and we clean up debris generated by the work before leaving. You're provided with a fixed-fee quote once scope is verified, and the price quoted is the price paid. All work is backed by our Lifetime Labour Warranty on workmanship.

For emergency support, call 1800 349 338 anytime, day or night. We're available 365 days a year.

Hot water system installations in Cromer homes must comply with the National Construction Code and AS/NZS 3500 standards, which require licensed installation, mandatory Tempering Valves to prevent scalding (limiting water to 50°C at the tap), and Pressure Relief Valves to prevent tank over-pressurisation. Fixed Today Plumbing is licensed to install, repair, and maintain electric storage, gas continuous flow, and heat pump systems from major brands including Rheem, Dux, Rinnai, Vulcan, Aquamax, and Thermann.

Fluctuating water temperatures or rust-coloured water in the morning often indicate a failing sacrificial anode rod or sediment buildup within the tank. Sediment insulates heating elements or gas burners, reducing efficiency and potentially leading to tank corrosion or failure. If your water heater is over ten years old, running out of hot water more quickly than usual, or showing visible rust or leaks, it's worth arranging an assessment to confirm whether replacement or repair is the right option.

We assess the fault onsite, explain the repair or replacement options, and provide a fixed-fee quote before starting work. For new installations, we help you select the right system size and fuel type (electric, gas, or heat pump) based on household size, usage patterns, and available space. Installation includes all required safety devices, compliance with Australian Standards, and testing to confirm correct operation before departing.

Common hot water issues we resolve:

1. No hot water or inconsistent temperatures — Usually caused by a faulty thermostat, heating element, or gas pilot light.
2. Leaking tanks or pressure relief valves — Often indicates internal corrosion or excessive pressure buildup.
3. Noisy operation or rumbling sounds — Typically caused by sediment buildup on the tank floor.
4. Running out of hot water quickly — May indicate an undersized system, sediment buildup, or a failing heating element.

All hot water work is backed by our Lifetime Labour Warranty on workmanship, plus standard manufacturer warranties on hardware and appliances. We're available 24/7 for emergency hot water servicing, with service the same day available where scheduling allows.

For hot water repairs, new installations, or system upgrades, call 1800 349 338 to book an assessment.